HVAC Air Intake Protection Cover for Refreshed Tesla Model Y — clean product view 1 / 8

HVAC Air Intake Protection Cover for Refreshed Tesla Model Y

$24.74 $27.49 Save 10%
Taxes calculated at checkout

A Type B intake cover for the refreshed Model Y opening shown. Its mesh and shaped frame sit over the intake area to intercept larger loose debris while leaving the screen openings visible.

Configuration: Refreshed Model Y - HVAC Air Intake Cover, Type B

Trade quantity selected. Request a trade quote; checkout does not apply a wholesale rate automatically.

Available offers

Use TRIM10 at checkout. One use per customer.

$149
Secure checkout
Free over $149
30-day returns
Check your model and generation

Match your vehicle year and the selected configuration. If you are unsure, send your model, year and a clear photo before ordering. Ask about fitment

Delivery information Returns policy Warranty support
Buying for a business? Request a quote

The selected Type B intake-cover configuration. No cabin filter or HVAC component is supplied as part of this cover. Check retention and nearby panel clearance. Remove the cover and seek advice if unusual airflow, noise or fit problems arise.

Order information
Retail minimum1 unit
Processing time1–2 business days
U.S. shippingFree shipping over $149
Fitment helpAsk a question
Description

A Type B intake cover for the refreshed Model Y opening shown. Its mesh and shaped frame sit over the intake area to intercept larger loose debris while leaving the screen openings visible. The frame follows the under-hood intake outline. Mesh openings remain exposed across the screen. The cover is not a replacement cabin air filter, and this listing does not establish a measured airflow or water-ingress rating.

Shipping
  • Free worldwide shipping over $149. Below that, cost is calculated at checkout by weight, size and destination.
  • Dispatch within 48 working hours. Slightly longer over weekends and public holidays.
  • Express or standard. DHL / UPS / FedEx, or postal services. We pick the most suitable route unless you leave a note on the order.
  • Tracking by email as soon as the label is scanned.
  • Duties are the buyer’s responsibility. Some destinations need a tax ID (Brazil CPF, Italy CF, South Korea PCCC). Remote addresses may carry a surcharge.
Read the full shipping policy  →
Returns
  • 30 days from delivery. Contact us inside that window to start a return. The item must be unused, with the liner on and in its original packaging.
  • Faulty, damaged or wrong item — our cost. Full refund or replacement, including approved return shipping.
  • Changed your mind? Return shipping is your responsibility. Cancel before dispatch and there is no return shipment.
  • Once installed, it can’t be returned. Adhesive trim cannot be treated as an unused item after fitting.
  • Support needs a few details. Send the model, model year and one or two photos of the issue.

Read the full return & refund policy →

Fitment

For the refreshed Model Y intake profile pictured. Type B is a configuration identifier, not a universal size. Other intake outlines require separate verification.

SKU: TV-19-01

Checkout securely with Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
HVAC Air Intake Protection Cover for Refreshed Tesla Model Y

A screen over the under-hood intake

A Type B intake cover for the refreshed Model Y opening shown. Its mesh and shaped frame sit over the intake area to intercept larger loose debris while leaving the screen openings visible.

HVAC Air Intake Protection Cover for Refreshed Tesla Model Y
Highlights

A screen over the under-hood intake

Coverage at the intake opening
Coverage at the intake opening

The cover sits over the pictured under-hood intake, not over an interior passenger vent.

Larger debris stays accessible
Larger debris stays accessible

Leaves resting on the screen can be removed from the surface. Clear accumulated debris instead of allowing it to cover the mesh.

Compare the finishes +
Design

Visible mesh, shaped perimeter

Check the perimeter and open mesh.

An open mesh intake cover. A close view of the screen across the intake area.

Visible mesh, shaped perimeter

The frame follows the under-hood intake outline. Mesh openings remain exposed across the screen. The cover is not a replacement cabin air filter, and this listing does not establish a measured airflow or water-ingress rating.

Finish

Type B for the pictured intake

One Type B configuration is currently listed.

HVAC Air Intake Protection Cover for Refreshed Tesla Model Y — Water-deflection designType B for the pictured intake

The only listed option is the Refreshed Model Y Type B cover. Compare the complete frame outline, center join and retention points with the intake on your car.

The selected Type B intake-cover configuration. No cabin filter or HVAC component is supplied as part of this cover.

HVAC Air Intake Protection Cover for Refreshed Tesla Model Y
Installation

Keep the intake opening clear

01

Inspect the original intake

With the vehicle safely parked, locate the intended intake and remove loose debris. Compare its perimeter with the cover.

02

Fit the correct frame

Use the supplied fitting method and retention points. Do not seal over the mesh or force an incorrectly shaped frame.

03

Recheck after fitting

Check retention and nearby panel clearance. Remove the cover and seek advice if unusual airflow, noise or fit problems arise.

After installation

Check retention and nearby panel clearance. Remove the cover and seek advice if unusual airflow, noise or fit problems arise.

Fitment

Match the under-hood intake

For the refreshed Model Y intake profile pictured. Type B is a configuration identifier, not a universal size. Other intake outlines require separate verification.

The matching configuration

For the refreshed Model Y intake profile pictured. Type B is a configuration identifier, not a universal size. Other intake outlines require separate verification.

Unsure which option applies? Send your model, model year and a clear photo before ordering.

Contact TERVELIO
Specifications

Product details

Product

HVAC Air Intake Protection Cover for Refreshed Tesla Model Y

Configurations

Refreshed Model Y - HVAC Air Intake Cover, Type B

Package

The selected Type B intake-cover configuration. No cabin filter or HVAC component is supplied as part of this cover.

Fitment

For the refreshed Model Y intake profile pictured. Type B is a configuration identifier, not a universal size. Other intake outlines require separate verification.

Fitment support

Send the vehicle model, model year and one clear photo if you are unsure which option applies.

FAQ

Intake screen: scope and care

Does this replace the cabin filter?

No. It is an exterior intake debris screen, not the cabin filtration element.

Is it a waterproof seal?

No. Do not rely on it to prevent water ingress or to seal the intake.

Does open mesh prove unchanged airflow?

No measured airflow result is provided. Keep the mesh clear and investigate any change in HVAC operation.

Which version is listed?

Refreshed Model Y, Type B. Match the actual intake outline rather than choosing by the Type B name alone.

What should I measure or photograph before ordering?

Use the exact Tesla model, generation and model year, then compare one clear photo of the mounting area with the listing media. Model year alone is not enough when the interior or body part changed mid-cycle.

What comes in the package?

The selected option — “Refreshed Model Y - HVAC Air Intake Cover, Type B” — is the packing reference. Piece counts and left/right sets follow the option title and Description section; accessories shown only as context in photos are not assumed included.

From the Journal

Guides for this product

Fitment checks, installation steps and care for this part.

All guides
Two unassembled roof rack crossbars and their components on a grey inspection mat Exterior Parts · Aug 2026 Tesla Roof Rack Crossbars: Fit, Documentation and Trip PlanningA practical roof-rack planning guide: resolve vehicle approval and system documents, compare listed crossbar choices, then prepare the carrier and family trip. Four black mud flaps laid out on a grey work surface Exterior Parts · Aug 2026 No-Drill Tesla Mud Flaps: Fit Checks, Setup and AftercareA five-stage workflow for choosing and checking a Tesla mud flap set, with generation options, everyday use cases, clearance questions and troubleshooting.

Recently viewed

TERVELIO Fitment-first Tesla accessories