Matte-black ABS front splitter for Tesla Model 3 Highland on a clean white background 1 / 5

Front Lip Splitter for Tesla Model 3

$50.59
Taxes calculated at checkout

A matte-black ABS front splitter shaped for the refreshed Tesla Model 3 Highland. Its angular ends and segmented center add definition below the bumper, with a low-gloss finish that keeps the appearance understated.

Configuration: Refreshed Model 3 - Matte Black Front Splitter

Trade quantity selected. Request a trade quote; checkout does not apply a wholesale rate automatically.

Available offers

Use TRIM10 at checkout. One use per customer.

$149
Secure checkout
Free over $149
30-day returns
Check your model and generation

Match your vehicle year and the selected configuration. If you are unsure, send your model, year and a clear photo before ordering. Ask about fitment

Delivery information Returns policy Warranty support
Buying for a business? Request a quote

Professional fitting is recommended. Use the supplied instructions and mounting hardware; do not assume this is a tape-only or no-drilling installation. Never work under an unsupported vehicle. Wash with a mild, material-appropriate cleaner and a soft cloth. Avoid abrasives and strong solvents. Inspect the joins and mounting points regularly, especially after contact with a curb or driveway.

Order information
Retail minimum1 unit
Processing time1–2 business days
U.S. shippingFree over $149
Fitment helpAsk a question
Description

A matte-black ABS front splitter shaped for the refreshed Tesla Model 3 Highland. Its angular ends and segmented center add definition below the bumper, with a low-gloss finish that keeps the appearance understated. A long center blade meets sculpted corners to follow the Highland bumper. The lip sits below the original bumper; allow extra clearance when approaching ramps, driveways and curbs. This listing contains the matte-black configuration. The fine-grain surface is intentionally different from a glossy or carbon-look finish.

Shipping
  • Free worldwide shipping over $149. Below that, cost is calculated at checkout by weight, size and destination.
  • Dispatch within 48 working hours. Slightly longer over weekends and public holidays.
  • Express or standard. DHL / UPS / FedEx, or postal services. We pick the most suitable route unless you leave a note on the order.
  • Tracking by email as soon as the label is scanned.
  • Duties are the buyer’s responsibility. Some destinations need a tax ID (Brazil CPF, Italy CF, South Korea PCCC). Remote addresses may carry a surcharge.
Read the full shipping policy  →
Returns
  • 30 days from delivery. Contact us inside that window to start a return. The item must be unused, with the liner on and in its original packaging.
  • Faulty, damaged or wrong item — our cost. Full refund or replacement, including approved return shipping.
  • Changed your mind? Return shipping is your responsibility. Cancel before dispatch and there is no return shipment.
  • Once installed, it can’t be returned. Adhesive trim cannot be treated as an unused item after fitting.
  • Support needs a few details. Send the model, model year and one or two photos of the issue.

Read the full return & refund policy →

Fitment

For the refreshed Tesla Model 3 Highland, 2024 onward. Not for the earlier Model 3 bumper or Model Y. Confirm the original lower-bumper shape and any existing exterior modifications before ordering.

SKU: TSL000149

Checkout securely with Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
Front Lip Splitter for Tesla Model 3

A sharper lower edge.

A matte-black ABS front splitter shaped for the refreshed Tesla Model 3 Highland. Its angular ends and segmented center add definition below the bumper, with a low-gloss finish that keeps the appearance understated.

Matte-black front splitter installed on a silver Tesla Model 3 Highland
Highlights

Three details, one front profile.

Matte-black front splitter installed on a silver Tesla Model 3 Highland
A sculpted front edge

The center blade extends the lower bumper line while the raised ends create a more defined front outline.

Close detail of the fine-grain matte ABS surface and center rib
A quiet matte finish

The fine-grain black ABS surface avoids a glossy reflection. This is the matte-black selection, not the carbon-style or gloss version.

Inside profile of the assembled front splitter with shaped ends and a center join
Joined into one profile

The segmented design forms a continuous front edge after alignment. Check both corners and the center join before fixing it in place.

Compare the finishes +
Design

A profile with purpose.

A long center blade meets sculpted corners to follow the Highland bumper. The lip sits below the original bumper; allow extra clearance when approaching ramps, driveways and curbs.

Angular corner and inner wing of the matte-black Highland front splitter

Shaped around the corner

The angular end and inner wing follow the bumper corner. Compare the lip with the actual lower bumper during the dry fit rather than forcing a misaligned section.

Finish

Matte, not gloss.

This listing contains the matte-black configuration. The fine-grain surface is intentionally different from a glossy or carbon-look finish.

Close detail of the fine-grain matte ABS surface and center ribCONFIGURATION

One front-splitter configuration for the refreshed Model 3 Highland. Images show the assembled profile; vehicles and other styling parts are not included.

Lighting and display settings may affect the appearance of the finish. Match the selected configuration, not another finish shown elsewhere.

Inside profile of the assembled front splitter with shaped ends and a center join
Installation

Align, secure and inspect.

01

Compare and dry-fit

Confirm the Highland bumper, lay out the sections and dry-fit the center and both ends. Check that panel edges and joins meet evenly before making any attachment.

02

Secure to the supplied method

Have a qualified installer follow the kit instructions and use the specified mounting hardware. Keep sensors, drainage and service access unobstructed; do not improvise new attachment points.

03

Check clearance and fixings

Inspect every mounting point and recheck the center join. Approach ramps slowly and allow for the new lower profile. Reinspect fixings after the first journeys.

After installation

Professional fitting is recommended. Use the supplied instructions and mounting hardware; do not assume this is a tape-only or no-drilling installation. Never work under an unsupported vehicle.

Fitment

Match the Highland bumper.

For the refreshed Tesla Model 3 Highland, 2024 onward. Not for the earlier Model 3 bumper or Model Y. Confirm the original lower-bumper shape and any existing exterior modifications before ordering.

Highland front bumper

For refreshed Model 3 Highland, 2024 onward. Earlier Model 3 and Model Y bumper shapes are different. Confirm year, bumper shape and existing modifications before ordering.

Send your model, model year and a clear installation-area photo to TERVELIO before ordering if fitment is uncertain.

Contact TERVELIO
Specifications

Product details

Product

Matte-black front splitter

Vehicle

Refreshed Tesla Model 3 Highland, 2024 onward

Material / finish

Molded ABS; fine-grain matte-black finish

Installation area

Below the front bumper; extra lower clearance is required

SKU

TSL000149

Package

Front-splitter kit in the selected configuration. Confirm supplied mounting hardware before installation. Demonstration vehicle is not included.

FAQ

Before you fit it.

Will it fit the earlier Model 3?

No fitment is claimed for the earlier bumper. This selection is shaped for the refreshed Model 3 Highland; compare the actual bumper with the reference before ordering.

Is the finish glossy or carbon fiber?

No. This configuration is matte-black ABS. Gloss-black and carbon-look images from other selections are not a reference for this finish.

Can I fit it with adhesive tape alone?

Do not assume a tape-only installation. Follow the kit instructions and specified hardware. Professional fitting is recommended, and the lip reduces the clearance below the bumper.

What should I measure or photograph before ordering?

Use the exact Tesla model, generation and model year, then compare one clear photo of the mounting area with the listing media. Model year alone is not enough when the interior or body part changed mid-cycle.

What comes in the package?

The selected option — “Refreshed Model 3 - Matte Black Front Splitter” — is the packing reference. Piece counts and left/right sets follow the option title and Description section; accessories shown only as context in photos are not assumed included.

From the Journal

Guides for this product

Fitment checks, installation steps and care for this part.

All guides
Two unassembled roof rack crossbars and their components on a grey inspection mat Exterior Parts · Aug 2026 Tesla Roof Rack Crossbars: Fit, Documentation and Trip PlanningA practical roof-rack planning guide: resolve vehicle approval and system documents, compare listed crossbar choices, then prepare the carrier and family trip. Four black mud flaps laid out on a grey work surface Exterior Parts · Aug 2026 No-Drill Tesla Mud Flaps: Fit Checks, Setup and AftercareA five-stage workflow for choosing and checking a Tesla mud flap set, with generation options, everyday use cases, clearance questions and troubleshooting.

Recently viewed

TERVELIO Fitment-first Tesla accessories