Model Y front lip with a woven surface and separate end pieces, isolated on a white background. 1 / 9

Carbon-Style Front Lip Spoiler for Tesla Model Y

$164.99
Taxes calculated at checkout

A sculpted, carbon-pattern front lip that follows the lower bumper shown on the supplier's refreshed Model Y. Raised inner contours, a broad centre section and separate end pieces give the photographed assembly its distinct shape.

Configuration: Model Y - Carbon Fiber Front Lip

Trade quantity selected. Request a trade quote; checkout does not apply a wholesale rate automatically.

Available offers

Use TRIM10 at checkout. One use per customer.

$149
Secure checkout
Free over $149
30-day returns
Check your model and generation

Match your vehicle year and the selected configuration. If you are unsure, send your model, year and a clear photo before ordering. Ask about fitment

Delivery information Returns policy Warranty support
Buying for a business? Request a quote

Compare the refreshed bumper shown in the source photographs with your actual vehicle.

Only the selected front lip is included; other body-kit components shown are excluded.

Confirm material specification, supplied fixing parts and fitting instructions before installation.

Order information
Retail minimum1 unit
Processing time1–2 business days
U.S. shippingFree over $149
Fitment helpAsk a question
Description

A sculpted, carbon-pattern front lip that follows the lower bumper shown on the supplier's refreshed Model Y. Raised inner contours, a broad centre section and separate end pieces give the photographed assembly its distinct shape.

A defined lower-bumper profile: The installed reference shows the lip extending along the bottom edge of the front bumper, with two raised sections framing the central area. The new gallery image shows both the fitted view and detached component layout, so you can compare the contour rather than rely on a general Model Y label.

What the photographs show: The detached layout includes a long front section and two small side pieces. The surface has a visible carbon pattern. Although the supplier and catalog describe carbon-fiber construction, photographs alone do not independently verify the laminate or material specification; request confirmation if construction is important to your order.

Match the refreshed bumper: The supplier's fitted vehicle is the refreshed Model Y shown in the photographs. Do not assume that a legacy bumper, aftermarket replacement bumper or another Model Y generation uses the same profile. Compare the lower grille, bumper corners and intended fixing positions before ordering.

The selected item, not the full body kit: This listing is for the selected front-lip configuration. A rear diffuser, side skirts, wheel-arch pieces, wheels and vehicle appearing in the source listing are not included merely because they are shown on the demonstration car. Confirm the mounting parts supplied for this exact front lip before fitting.

Fitting and everyday clearance: Obtain the verified fitting instructions, check the mounting surfaces and trial-position the components before securing them. Body-kit fitting is best handled by a qualified installer. A lower protruding edge may affect clearance at ramps and kerbs; no downforce, crash-protection or aerodynamic-performance claim is made.

Care: Clean with a soft cloth and a finish-compatible cleaner. Avoid abrasive pads and strong solvents. Check the fixings and lower edge periodically, particularly after contact with a ramp or road debris; stop using a loose or damaged assembly.

Shipping
  • Free worldwide shipping over $149. Below that, cost is calculated at checkout by weight, size and destination.
  • Dispatch within 48 working hours. Slightly longer over weekends and public holidays.
  • Express or standard. DHL / UPS / FedEx, or postal services. We pick the most suitable route unless you leave a note on the order.
  • Tracking by email as soon as the label is scanned.
  • Duties are the buyer’s responsibility. Some destinations need a tax ID (Brazil CPF, Italy CF, South Korea PCCC). Remote addresses may carry a surcharge.
Read the full shipping policy  →
Returns
  • 30 days from delivery. Contact us inside that window to start a return. The item must be unused, with the liner on and in its original packaging.
  • Faulty, damaged or wrong item — our cost. Full refund or replacement, including approved return shipping.
  • Changed your mind? Return shipping is your responsibility. Cancel before dispatch and there is no return shipment.
  • Once installed, it can’t be returned. Adhesive trim cannot be treated as an unused item after fitting.
  • Support needs a few details. Send the model, model year and one or two photos of the issue.

Read the full return & refund policy →

Fitment

The supplier reference shows a refreshed Model Y lower front bumper. Confirm your model year, actual bumper contour and mounting positions against the installed and detached photographs. Compatibility with legacy Model Y bumpers or other body kits is not established by the broad variant name.

SKU: TSL000151

Checkout securely with Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
Carbon Fiber Front Lip Spoiler for Tesla Model Y

A shaped front-bumper accent.

A sculpted, carbon-pattern front lip that follows the lower bumper shown on the supplier's refreshed Model Y. Raised inner contours, a broad centre section and separate end pieces give the photographed assembly its distinct shape.

TERVELIO front lip shown installed on the supplier's refreshed Model Y, with the detached lip and two side pieces below; other body-kit parts are not included.
Highlights

Follow the selected bumper shape

Front lip installed on the supplier-photographed silver Model Y, showing raised contours along the lower bumper.
A defined front edge

The supplier's installed view shows the front lip following the lower bumper on a refreshed Model Y. Other vehicle modifications shown are not included.

Close-up of the supplier-photographed front lip raised inner contour and lower bumper edge.
Raised at the inner edge

The close-up shows the raised inner section and curved outer edge. The catalog lists carbon fiber; the appearance alone is not independent proof of material composition.

Supplier-referenced front lip layout with one central piece and two separate outer end pieces.
See the component layout

The source layout shows one central front lip and two separate outer end pieces. Confirm selected contents and mounting guidance before installation.

Compare the finishes +
Design

Confirm the selected material

The installed reference shows the lip extending along the bottom edge of the front bumper, with two raised sections framing the central area. The new gallery image shows both the fitted view and detached component layout, so you can compare the contour rather than rely on a general Model Y label.

TERVELIO front lip shown installed on the supplier's refreshed Model Y, with the detached lip and two side pieces below; other body-kit parts are not included.

A shaped lower-bumper contour

The installed reference shows the lip extending along the bottom edge of the front bumper, with two raised sections framing the central area. The new gallery image shows both the fitted view and detached component layout, so you can compare the contour rather than rely on a general Model Y label.

Finish

Check the selected finish

Carbon fiber claimed in catalog; not independently verified. Match the front lip to the actual bumper generation; Model Y generations cannot be assumed to share the same contour.

Supplier-referenced front lip layout with one central piece and two separate outer end pieces.CONFIGURATION

Compare the photographed layout with the selected option. Confirm the fixing method and supplied items; do not assume installation hardware or adhesive is included.

The selected configuration determines the vehicle fit and the supplied item or set.

TERVELIO front lip shown installed on the supplier's refreshed Model Y, with the detached lip and two side pieces below; other body-kit parts are not included.
Installation

Check, fit and inspect

01

Check the selected vehicle and part

Compare the chosen option with the actual front lower bumper. Confirm the installation instructions and any required parts before starting.

02

Fit using the verified instructions

A visible carbon pattern alone does not establish genuine carbon-fiber construction. Do not improvise an attachment or electrical connection if the supplied instructions are missing.

03

Check the installed result

Check the selected configuration and its fixing method before installation. Keep moving parts, controls and relevant service points unobstructed.

After installation

Check the selected configuration and its fixing method before installation. Keep moving parts, controls and relevant service points unobstructed.

Fitment

Match the vehicle and installation area

The supplier reference shows a refreshed Model Y lower front bumper. Confirm your model year, actual bumper contour and mounting positions against the installed and detached photographs. Compatibility with legacy Model Y bumpers or other body kits is not established by the broad variant name.

Match the front bumper

The supplier reference shows a refreshed Model Y lower front bumper. Confirm your model year, actual bumper contour and mounting positions against the installed and detached photographs. Compatibility with legacy Model Y bumpers or other body kits is not established by the broad variant name.

Send your model, model year and a clear installation-area photo to TERVELIO before ordering if fitment is uncertain.

Contact TERVELIO
Specifications

Product details

Product

Carbon Fiber Front Lip Spoiler for Tesla Model Y

Installation area

Front lower bumper

Selected options

Model Y - Carbon Fiber Front Lip

Finish / construction

Carbon fiber claimed in catalog; not independently verified

SKU

TSL000151

Package

Only the item or set named in the selected configuration. Demonstration vehicles and accessories are not included.

FAQ

Questions before ordering

Does this fit every Model Y?

No. The source reference shows the refreshed bumper. Compare your actual lower grille, bumper corners, model year and mounting area before ordering.

Is this a complete body kit?

No. This selection is the front lip. The detached layout shows the main lip and small end pieces; other body-kit components on the demonstration vehicle are not included. Confirm supplied fixing parts.

Does the carbon pattern prove carbon-fiber construction?

No. The supplier and catalog describe carbon fiber, but appearance alone does not independently establish the material. Request construction confirmation if it is important to your purchase.

What should I measure or photograph before ordering?

Use the exact Tesla model, generation and model year, then compare one clear photo of the mounting area with the listing media. Model year alone is not enough when the interior or body part changed mid-cycle.

What comes in the package?

The selected option — “Model Y - Carbon Fiber Front Lip” — is the packing reference. Piece counts and left/right sets follow the option title and Description section; accessories shown only as context in photos are not assumed included.

From the Journal

Guides for this product

Fitment checks, installation steps and care for this part.

All guides
Two unassembled roof rack crossbars and their components on a grey inspection mat Exterior Parts · Aug 2026 Tesla Roof Rack Crossbars: Fit, Documentation and Trip PlanningA practical roof-rack planning guide: resolve vehicle approval and system documents, compare listed crossbar choices, then prepare the carrier and family trip. Four black mud flaps laid out on a grey work surface Exterior Parts · Aug 2026 No-Drill Tesla Mud Flaps: Fit Checks, Setup and AftercareA five-stage workflow for choosing and checking a Tesla mud flap set, with generation options, everyday use cases, clearance questions and troubleshooting.

Recently viewed

TERVELIO Fitment-first Tesla accessories