Cart
0
Suede-finish trim adds texture where the cabin normally uses smooth plastics. A successful choice depends on location, color balance, contact frequency and whether the snap-on shell matches the underlying part.
Choose location before color
An armrest cover is touched constantly; a rear-screen frame is seen more than touched. The same material can therefore require different color and care decisions in each position.
Quick checklist
- Select armrest or rear-screen trim explicitly.
- Match the shell to the refreshed vehicle geometry.
- Use darker colors where contact is frequent.
- Remove dust with a soft brush or low-suction vacuum.
- Blot moisture instead of rubbing it into the surface.
Five selection and care steps
Work through the sequence in order. Each step removes a different source of fitment or installation error.
- Choose the trim location. Decide whether the goal is armrest texture, rear-screen framing or both.
- Compare cabin colors. View charcoal, green, red and orange against seats, dashboard and ambient lighting.
- Dry-fit the shell. Check every edge and moving part before pressing the snap-on piece fully into place.
- Set a weekly care routine. Lift loose dust gently before it becomes embedded in the fibers.
- Treat spots carefully. Use minimal moisture, blot from the outside inward and allow the area to dry naturally.
Fitment first. A listing title is a starting point. The physical shape, model year and selected option must also match the vehicle.
Common mistakes to avoid
- Choosing color from a close-up swatch alone.
- Scrubbing a spot before lifting loose dust.
- Using too much liquid on a suede-touch surface.
Take one clear photo before installation and another after the final check. If support is needed later, those two images make it much easier to distinguish a fitment issue from an alignment or surface-preparation issue.
Color and use guide
| Option | Visual effect | Practical note |
|---|---|---|
| Charcoal black | Quiet and integrated | Most forgiving |
| Dark green | Subtle color | Works with muted cabins |
| Bordeaux red | Warm contrast | Coordinate with accents |
| Orange | High visibility | Strongest statement |
See texture, location, and color
The product loop compares the trim locations and shows how the surface reads at normal viewing distance.
Care conservatively
Avoid soaking, harsh solvent cleaners and aggressive brushing. Test any cleaner on a hidden area and follow the product care instructions.
For current options, specifications and availability, see Suede Armrest and Rear Screen Trim for Refreshed Tesla Model 3/Y. Product configuration names should be checked again at checkout.
Tesla, Model 3, Model Y and Cybertruck are trademarks of Tesla, Inc. TERVELIO is an independent brand and is not affiliated with, endorsed by or sponsored by Tesla, Inc. Model references are used only for fitment identification.
