Cart
0
Designed around the camera. The opening follows the supplied housing profile. Verify the camera view and related vehicle functions after installation.
1 / 9
Tervelio
Full-Wrap Camera Trim Covers for Refreshed Tesla Model 3/Y
$45.53
$50.59
Save 10%
Available to order
Taxes calculated at checkout
Order information
Retail minimum1 unit
Processing time1–2 business days
U.S. shippingFree over $149
Fitment helpFree check
Trade quantity selected. Request volume pricing below; checkout does not apply a wholesale rate automatically.
Available offers
Use TRIM10 at checkout. One use per customer.
Guaranteed safe checkout
$149
Secure checkout
Free over $149
30-day returns
Description
Shipping
- Free worldwide shipping over $149. Below that, cost is calculated at checkout by weight, size and destination.
- Dispatch within 48 working hours. Slightly longer over weekends and public holidays.
- Express or standard. DHL / UPS / FedEx, or postal services. We pick the most suitable route unless you leave a note on the order.
- Tracking by email as soon as the label is scanned.
- Duties are the buyer’s responsibility. Some destinations need a tax ID (Brazil CPF, Italy CF, South Korea PCCC). Remote addresses may carry a surcharge.
Returns
- 30 days from delivery. Contact us inside that window to start a return. The item must be unused, with the liner on and in its original packaging.
- Faulty, damaged or wrong item — our cost. Full refund or replacement, including approved return shipping.
- Changed your mind? Return shipping is your responsibility. Cancel before dispatch and there is no return shipment.
- Once installed, it can’t be returned. Adhesive trim cannot be treated as an unused item after fitting.
- Support needs a few details. Send the model, model year and one or two photos of the issue.
Fitment
The one detail at eye level.
A vehicle-specific full-wrap cover gives the camera housing a more deliberate visual finish without drilling. Confirm vehicle compatibility before ordering.
Highlights
Four details worth looking at closely.
Full-wrap profile. The formed cover follows the camera housing instead of reading like a flat cap placed on top.
Adhesive along the perimeter. The supplied backing follows the outer edge so installation pressure is applied around the contact area.
Two finishes, one geometry. Matte and gloss share the same profile; the surface treatment changes how the part responds to light.
Design
Profile, opening, edge.
On a small exterior part, these three details decide whether the result feels integrated or added afterward.
A formed cover, not a flat overlay.
The profile follows the camera housing and carries the visual line toward the body panel, helping the installed part read as one considered form.
Finished edges follow the perimeter where the cover meets the panel.
The opening is the reference point.
Dry-fit from several angles and confirm that the visible opening follows the housing before removing the liner.
Do not continue if the part sits unevenly or interferes with the camera housing.
Finish
Matte Black
Gloss Black
Same profile. Two surfaces.
Matte and gloss share the same form and installation method. The difference is how each surface responds to light.
Matte Black
A low-gloss carbon-fiber appearance that softens reflections and keeps the visible pattern restrained across the curved surface.
Gloss Black
A polished carbon-fiber appearance with stronger highlights, making the pattern and profile more visually pronounced.
Lighting, paint color and screen settings affect how each finish appears. Use the comparison as a visual guide and review the selected variant before checkout.
Installation
A careful three-step installation.
01
Clean
Wash and dry the housing completely. Remove dust, wax and residue, then work on a cool surface in a clean, shaded area.
02
Dry fit and align
Keep the liner on while checking the opening and perimeter from several angles. Do not continue if the part sits unevenly.
03
Apply even pressure
Remove the liner, set the part without stretching it, and press from the center toward the full perimeter.
After installationVerify the camera view and related vehicle functions before normal driving. Remove the cover if anything appears obstructed or behaves differently.
Fitment
Check compatibility before ordering.
Vehicle-specific exterior trim, not a universal accessory.
Confirm before ordering
- Vehicle generation. Confirm that your vehicle matches the supported refreshed configuration.
- Model year and selected option. Review the exact variant before checkout.
- Original housing. The mounting surface should be clean, undamaged and unmodified.
Contact us for confirmation
- Pre-refresh vehicles or unlisted models.
- Modified, repaired, wrapped or replaced camera housings.
- Any configuration that does not match the product images.
Unsure which option applies? Send your model, year and a clear photo before ordering. Contact TERVELIO
Specifications
- Product
- Full-wrap exterior camera trim cover
- Fitment
- Selected refreshed Model 3 / Model Y configurations; confirm the selected option
- Finish
- Matte black or gloss black, carbon-fiber appearance
- Opening
- Shaped around the camera housing and repeater area
- Mounting
- Adhesive-backed installation; no drilling or permanent fasteners required
- Included items
- Refer to the selected variant and checkout details for confirmed package contents
FAQ
Fitment & installation
Will it fit my vehicle?
Confirm the model, model year, vehicle generation and selected product option before ordering. Pre-refresh vehicles and other models can use different housing geometry. Send a clear photo if you are unsure.
Does it affect the camera?
The visible opening follows the supplied housing profile, but vehicle configuration and installation alignment can vary. After installation, verify the camera view and related functions before normal driving.
Does installation require tools or drilling?
No drilling or permanent fasteners are required. Clean and dry the surface, dry fit the cover with the liner attached, align it carefully, then apply even pressure around the perimeter.
Can I remove it later?
The cover is adhesive-mounted, so removal may be possible, but the result depends on the adhesive, installation time, temperature and surface condition. Do not assume removal will be trace-free.
Is it real carbon fiber?
TERVELIO describes the visible surface as a carbon-fiber appearance. We do not state a material composition or manufacturing method unless supported by current supplier documentation and product testing.
Should I choose matte or gloss?
Both options use the same profile. Matte produces softer reflections and a quieter look; gloss creates stronger highlights and makes the visible pattern more pronounced.
What should I measure or photograph before ordering?
Use the exact Tesla model, generation and model year, then compare one clear photo of the mounting area with the listing media. Model year alone is not enough when the interior or body part changed mid-cycle.
What comes in the package?
The selected option — “Matte Black” — is the packing reference. Piece counts and left/right sets follow the option title and Description section; accessories shown only as context in photos are not assumed included.
Configuration & evidence
Use this listing only for the Tesla model and generation named in “Full-Wrap Camera Trim Covers for Refreshed Tesla Model 3/Y”. Then choose the exact configuration shown in the variant selector. If the mounting area does not visually match, stop and request a fitment check before ordering.
| Selected configuration | Matte Black · SKU TV-02-01 |
|---|---|
| Installation method | Adhesive-mounted after cleaning and a complete dry-fit |
| Installation difficulty | Basic — surface preparation and first-time alignment matter most |
Configurations on this listing
- Matte Black
- Gloss Black
Fitment guidance reduces avoidable ordering errors; it does not replace Tesla service information or product-specific safety instructions.
