{"product_id":"steel-front-motor-underbody-guard-for-tesla-model-3-165","title":"Steel Front Motor Underbody Guard for Tesla Model 3","description":"\u003cp\u003eA formed carbon-steel underbody guard for the front-motor area of the refreshed Tesla Model 3. The broad panel, stamped ribs and defined mounting openings provide position-specific coverage beneath the motor.\u003c\/p\u003e\u003ch3\u003eDesign and finish\u003c\/h3\u003e\u003cp\u003eThe panel uses a shaped steel sheet with stamped ribs and notched edges. Its mounting layout belongs at the front-motor underside; it is not a battery enclosure, rear-motor plate or rear-bumper guard.\u003c\/p\u003e\u003cp\u003eThe selected configuration is a black-finished carbon-steel front-motor guard. The gallery separates the full panel, fitted location, rib surface, upper fixing holes and lower edge so the relevant geometry can be compared before installation.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe front-motor position applies to dual-motor \/ AWD Model 3 configurations. For the refreshed Model 3 selection, confirm the actual underbody revision and fixing layout before ordering. Do not assume fitment for a rear-wheel-drive car without a front motor, or for Model Y.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eOne front-motor underbody guard in the selected carbon-steel configuration. Confirm the required mounting hardware and instructions before fitting. Rear-motor, coolant-pipe and bumper guards are separate items.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the underside.\u003c\/strong\u003e Have a qualified installer identify the vehicle generation, dual-motor drivetrain and front-motor mounting layout on a properly supported lift. Compare the guard with all fixing points before removing panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition and secure.\u003c\/strong\u003e Follow the supplied fitting instructions and hardware requirements. Maintain clearance from wiring, cooling components, suspension and service access; do not drill into high-voltage components or improvise attachment points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the completed fit.\u003c\/strong\u003e Check every fixing, panel edge and neighboring component for secure attachment and clearance. Reinspect after the first journeys and any underbody contact. Stop and seek an inspection if the plate deforms or becomes loose.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eHave a qualified installer verify the drivetrain, mounting points, component clearance and supplied hardware. Never work underneath an unsupported vehicle, drill into high-voltage components or cover required cooling and service access. No crash resistance or impact rating is claimed.\u003c\/p\u003e\u003ch3\u003eCare\u003c\/h3\u003e\u003cp\u003eInspect fasteners, coating and clearance periodically and after underbody contact. Remove accumulated debris using a material-appropriate cleaner. Have a qualified installer assess any deformation or loosened fixing before continuing to drive.\u003c\/p\u003e\u003ch3\u003eQuestions before ordering\u003c\/h3\u003e\u003ch4\u003eWill it fit a rear-wheel-drive Model 3?\u003c\/h4\u003e\u003cp\u003eDo not assume it will. This is a front-motor guard, so the relevant layout is dual-motor \/ AWD. Have an installer confirm the actual drivetrain and attachment points before ordering.\u003c\/p\u003e\u003ch4\u003eIs this the rear-bumper or rear-motor guard?\u003c\/h4\u003e\u003cp\u003eNo. Those locations use different panels. This selection is for the front-motor underside; compare the shaped panel and fixing layout with the intended area.\u003c\/p\u003e\u003ch4\u003eDoes it guarantee protection against a collision or every road impact?\u003c\/h4\u003e\u003cp\u003eNo impact rating or crash-protection guarantee is claimed. The guard adds position-specific underbody coverage and requires correct fitting, periodic inspection and normal clearance precautions.\u003c\/p\u003e","brand":"TERVELIO","offers":[{"title":"Refreshed Model 3 - Carbon Steel Front Motor Guard","offer_id":53988980850964,"sku":"TSL000165","price":50.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3653\/6596\/files\/165-cover-tervelio-20261008.png?v=1791456087","url":"https:\/\/tervelio.com\/products\/steel-front-motor-underbody-guard-for-tesla-model-3-165","provider":"Tervelio","version":"1.0","type":"link"}